Leader monitor pomiarowy 6.5” SDI LV 5333 obsługuje sygnały 3G-SDI, HD-SDI i SD-SDI i 16 kanałów z embeddowanym sygnałem audio. Ma wbudowany wyświetlacz TFT LCD XGA 6.5-calowy o rozdzielczości 1024 x 768.
- Standardowe wyposażenie w funkcję CINELITE ułatwia zarządzanie poziomami określonych punktów na ekranie. Jest to użyteczne przy ustawianiu wzmocnienia sygnału dla wielu kamer za pomocą tego samego punktu odniesienia.
- Funkcja CINEZONE z kolei umożliwia sprawdzenie rozkładu luminancji całego obrazu i ułatwia wykrycie nadmiernej ekspozycji, niedoświetlenia i różnych poziomów luminancji w ciemnych obszarach.
- Funkcje: histogram, Gamma użytkownika, Gamut i poziom błędu są również w standardzie.
- Line Selector zaznacza dowolną linię sygnału wideo i wyświetla jej charakterystykę w trybie waveform, vector i pasków 5-Bar.
- Funkcje: obliczanie długość kabla, faza EXT i odchylenie częstotliwości pola.
- Wykrywa zakodowane napisy EIA608 i EIA708.
- Posiada złącze wyjściowe AES / EBU dla 2 kanałów audio.
- Wyodrębnia embeddowane sygnały audio i wysyła 2-kanałowo do gniazda słuchawek jack.
- Przycisk skrótu audio znajduje się na panelu przednim.
- Funkcja Screen Capture przechwytuje wyświetlany obraz i zapisuje go w pamięci wewnętrznej RAM lub w urządzeniu USB.
- Pamięć wewnętrzna zapamiętuje 30 ustawień, umożliwiając szybki dostęp do ustawień monitora.
- Monitor pomiarowy LV 5333może być zdalnie sterowany z komputera za pośrednictwem sieci Ethernet.
- Urządzenie można zamontowany na tripodzie razem z kamerą.
- Uniwersalny zasilacz AC pozwala na użytkowanie na całym świecie.
AVAILABLE ACCESSORIES:
- LR-2752-U: Rackmount Adapter for LV5330 and LV5333
- LC-2130-U: Blank Panel for LR-2752-U
- LC-2150: Tilt Stand for LV5330 and LV5333 (Replaces LV5330-TS)
- LC-2250-U: Carrying Case for LV5330 and LV5333
- LV5330-OP73: Battery Mount for IDX batteries (external connection)
- LV5330-OP73U: Battery Mount for IDX batteries (internal connection)
- LV5330-OP74: Battery Mount for Anton Bauer batteries (external connection)
- LV5330-OP74U: Battery Mount for Anton Bauer batteries (internal connection)
- LV5330FL: Fanless Cabinet for LV5330 and LV5333
- AC Adapter: AC Adapter for LV5330, LV5333, LV5381, LV5382, LV7330
Bit Rate | ||||
| 3G-SDI | 2.970 Gbps or 2.970/1.001 Gbps | SMPTE ST424 SMPTE ST425 | ||
| HD-SDI | 1.485 Gbps or 1.485/1.001 Gbps | SMPTE ST292 | ||
| SD-SDI | 270 Mbps | SMPTE ST259 | ||
SD-SDI Format and Compliance Standards | ||||
Color System | Quantization | Image | Field Frequency/Scanning | Compliance Standard |
| YCbCr 4:2:2 | 10 bit | 720 x 487 | 59.94/I | SMPTE ST259 |
| 720 x 576 | 50/I | |||
HD-SDI Format and Compliance Standards | ||||
Color System | Quantization | Image | Field Frequency/Scanning | Compliance Standard |
| YCbCr 4:2:2 | 10 bit | 1280 x 720 | 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P | SMPTE ST296 |
| 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | SMPTE ST274 | ||
3G-Level A Format and Compliance Standards | ||||
Color System | Quantization | Image | Field Frequency/Scanning | Compliance Standard |
| YCbCr 4:2:2 | 10 bit | 1920 x 1080 | 60, 59.94, 50/P | SMPTE ST274 |
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | ||
| YCbCr 4:4:4 | 10 bit | 1280 x 720 | 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P | SMPTE ST296 |
| 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | SMPTE ST274 | ||
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P | ||
| RGB 4:4:4 | 10 bit | 1280 x 720 | 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P | SMPTE ST296 |
| 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | SMPTE ST274 | ||
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P | ||
| 2048 x 1080 | 24, 23.98/P 24, 23.98/PsF | SMPTE ST2048-2 | ||
3G-Level B Format and Compliance Standards | ||||
Color System | Quantization | Image | Field Frequency/Scanning | Compliance Standard |
| YCbCr 4:2:2 | 10 bit | 1920 x 1080 | 60, 59.94, 50/P | SMPTE ST274 |
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | ||
| YCbCr 4:4:4 | 10 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | |
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | ||
| RGB 4:4:4 | 10 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | |
| 12 bit | 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | ||
| 2048 x 1080 | 24, 23.98/P 24, 23.98/PsF | SMPTE ST2048-2 | ||
3G-Level B DS Format and Compliance Standards | ||||
Color System | Quantization | Image | Field Frequency/Scanning | Compliance Standard |
| YCbCr 4:2:2 | 10 bit | 1280 x 720 | 60, 59.94, 50, 30, 29.97, 25, 24, 23.98/P | SMPTE ST296 |
| 1920 x 1080 | 60, 59.94, 50/I 30, 29.97, 25, 24, 23.98/P 30, 29.97, 25, 24, 23.98/PsF | SMPTE ST274 | ||
GENERAL SPECIFICATIONS | ||||
Environmental Conditions | ||||
| Operating Temperature | 0 to 40oC | |||
| Operating Humidity Range | 85% RH or less (no condensation) | |||
| Optimal Temperature | 10 to 30oC | |||
| Operating Environment | Indoors | |||
| Elevation | Up to 2000 m | |||
| Overvoltage Category | II | |||
| Pollution Degree | 2 | |||
Power Requirements | ||||
| Voltage | 10 to 18 VDC | |||
| Power Consumption | 28W max. | |||
Dimensions (excluding protrusions) | 215mm (W) x 128mm (H) x 63mm (D) | |||
Weight (excluding options) | 1.5 kg | |||
Accessories | (1) Instruction Manual, (1) 15-pin D-sub connector, (1) 15-pin D-sub connector cover, (1) VESA spacer, (1) Ferrite core | |||
Input / Output Connectors | ||||
SDI Input Connectors | ||||
| Connector Type | BNC Connectors, 2 inputs (switching between A and B) | |||
| Input Impedance | 75Ω | |||
| Input Return Loss | ≤ 15dB for 5MHz to the serial clock frequency | |||
| Maximum Input Voltage | ± 2V (DC + peak AC) | |||
SDI Output Connectors | ||||
| Function | Reclocks and transmits the selected SDI input signal | |||
| Connector Type | BNC connector, 1 output | |||
| Output Impedance | 75Ω | |||
| Output Voltage | 800 mVp-p ± 10% | |||
External Sync Input*1 | ||||
| Input Signals | Tri-level Sync or NTSC/PAL Black Burst signal | |||
| Connector Type | BNC connectors, 2 connectors / 1 input | |||
| Input Impedance | 15kΩ passive loop-through | |||
| Input Return Loss | ≤ 30dB for 50kHz to 30MHz | |||
| Maximum Input Voltage | ± 5V (DC + peak AC) | |||
Digital Audio Output Connectors | ||||
| Function | Extracts and transmits two channels of the audio signals embedded in an SDI signal | |||
| Connector Type | BNC | |||
| Output Impedance | 75Ω | |||
| Output Voltage | 1.0 Vp-p ± 10% (into 75Ω) | |||
| Compliant Standard | AES-3id | |||
Headphone Output | ||||
| Function | Extracts and transmits two channels of the audio signals embedded in an SDI signal | |||
| Channel Settings | Assign any of the channels in the selected audio group to L and R | |||
| Connector type | One stereo miniature jack | |||
| Volume Adjustment | From the menu | |||
| Impedance | 32Ω (16 to 600Ω) | |||
| *1: If the video signal waveform or the phase difference is displayed using an external sync signal as a reference, the waveform phase one clock before or after an SDI signal is inserted or the power is turned on is indefinite. External sync mode does not work for 30, 29.97, 25, 24, 23.98/P for 3G-A 1280 x 720 | ||||
Control Connectors | ||||
USB Port | ||||
| Function | Saves screen captures, preset data, event log data, and data dumps | |||
| Compliant Standard | USB 2.0 | |||
| Media | Only USB memory devices are supported | |||
Remote Connector | ||||
| Function | Load preset settings, switch input channels, enable the tally display, and transmit the alarm signal | |||
| Control Signal | TTL level (low active) | |||
| Control Connectors | 15-pin D-sub (female) | |||
| Locking Screws | Inch screws (no. 4-40UNC) | |||
Ethernet Port | ||||
| Function | Control the LV5333 from a PC and monitor errors and other events | |||
| Compliant Standard | IEEE 802.3 | |||
| Supported Protocols | TELNET, FTP, SNMP | |||
| I/O Connector | One RJ-45 jack | |||
| Type | 10Base-T/100Base-TX auto switching | |||
LCD | ||||
| LCD Type | 6.5-inch color TFT | |||
| Resolution | XGA. The effective area is 1024 x 768 dots | |||
| Backlight Brightness | HIGH, LOW | |||
| Auto Shutoff | LCD can be automatically turned off after a set period of time | |||
